Sb-filters Cold Air Intake Kit - Cotton Filter 75-2524 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires d'air Sb-filters Cold Air Intake Kit - Cotton Filter 75-2524. S&B Filters Cold Air Intake Kit - Cotton Filter 75-2524 User Manual [it] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1/23/2008
INSTALLATION INSTRUCTIONS
(Over)
(909) 947-0015 Telephone (909) 947-0603 Fax
www.sbfilters.com
75-2524
FORD
F-Series Super Duty V10-6.8L
Excursion V10-6.8L
Qty Parts List Qty Parts List
1 Aluminum Adapter 2 5/16” Hex Head Screw s
1 3.5” - 4” x 3” Adapter 1 5/8” Hose Coupler
1 4.25” x 3” Hump Adapter 2 11/32” Washers
1 CARB Sticker 1 #8 Hose Clamp
1 Air Filter 1 #16 Hose Clamp
2 MAF Gaskets 1 #60 Hose Clamp
1 1/2” Grommet 2 #72 Hose Clamp
4 1/4”-20 x 1” Bolt 1 #64 Hose Clamp
1 5/8” x 2.25” Hose
Tools Required
Flathead Screwdriver
Phillips Screwdriver
Ratchet
10mm Socket
13mm Socket
13mm Wrench
Drill
11/16” Drill Bit
5/16” Socket or Nut Driver
5. Unhook the wiring harness for the mass air
sensor that is attached to the fender.
6. Disconnect the electrical connection for the
secondary mass air sensor.
7. Detach the cover for the throttle body.
This will not be used for your new system.
8. Remove the air cleaner housing from vehi-
cle by pulling upwards firmly.
9. Remove the three bolts circled below.
10. Remove the bracket that was utilized to
mount the air cleaner.
11. Remove the bolt shown below.
12. Remove the “J” nuts (threaded clips)
13. Detach the 2 parts of the air cleaner assembly.
14. Detach the 4 clips that hold the retaining plate
for the mass air sensor by inserting a flat
head screwdriver.
15. Separate the rubber housing from the air
cleaner housing.
16. Disconnect the electrical connection for the
primary mass air sensor.
2. Loosen hose clamps on intake tube at the air
cleaner and throttle body.
1. With the engine turned off, disconnect the
vehicle’s negative battery cable.
3. On vehicles equipped with external air tem-
perature sensors, disconnect the air tempera-
ture sensor electrical connection.
4. Remove OEM intake tube.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

1/23/2008 INSTALLATION INSTRUCTIONS (Over) (909) 947-0015 Telephone (909) 947-0603 Fax www.sbfilters.com 75-2524 FORD F-Series Super Duty V10-

Page 2 - Please call (909) 947-0015

1/23/2008 (909) 947-0015 Telephone (909) 947-0603 Fax www.sbfilters.com INSTALLATION INSTRUCTIONS (continued) 23. Connect the idle air line to the

Commentaires sur ces manuels

Pas de commentaire