Sb-filters Intake Elbow 76-1003B Manuel d'utilisateur télécharger pdf

1. With the ignition switched off and the

parking brake set, disconnect the negative

battery cables on both batteries.

Installation Instructions

Vehicle Application

Year: 2003-04

Make: Ford

Model: F-Series

Engine: 6.0L V8

15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 - www.sbﬁlters.com

5. Loosen the hose clamp at the intercooler

lower ﬂange and remove the OE boost tube

from the vehicle along with clamps. Remember

how this is removed because it will have to be

repeated to install the new one.

6. Remove the 4 bolts that secure the OE

elbow to the intake manifold and remove the

elbow from the vehicle. Be careful not to let

debris fall into the intake manifold. Note the

longer boltʼs location.

2. Optional step, to allow better access to

the elbow. Use a small ﬂat head screwdriver

and pry the clips open and pull up working

your way across to remove the upper fan

shroud.

9. Remove the other clamp from the OE

boost tube. Clean the two clamps as they will

be re-used in the same location on the new

tube.

P/N: 76-1003 / 76-1003B

SEE EXPLODED VIEW ON PAGE 3

Tools Required

•

Ratchet and extensions

•

8mm, 10mm, 7/16” Wrench & Deep Socket

•

3/16” Hex Drive

•

Torque Wrench (In.lbs.)

•

Teﬂon tape

Notes

•

All required torque specs. are called out in

Inch pounds NOT foot pounds.

•

Installation will take approx. 1hr. to

complete.

Before You Start

•

Please read the entire product guide before proceeding.

•

Ensure all components listed on page 4 are present.

•

If you are missing any of the components, call our customer support at (909) 947-0015.

•

Do not work on your vehicle while engine is hot.

•

Make sure the engine is turned off and the vehicle is in Park or the Parking Brake is set.

3. Remove the OE (or aftermarket) intake to

gain access to the clamps of the OE boost

tube. Follow the manufactureʼs procedures

for removing the intake.

4. Loosen the hose clamp at the OE elbow

and pull the adapter off the elbow.

7. Apply sealant (Teﬂon tape) to each

1/8”NPT plugs (E) and insert the plugs into

the ports you will not use on the elbow. Use

3/16” Hex drive and torque the plugs to 40

In.lbs.

8. Place 6mm Washer (B) over each of the

M6x30mm Bolts (D) and one over the

M6x93mm Bolt (C), next apply a small

amount of the supplied thread locker to each

of the bolts.

Résumé du contenu

Page 1 - P/N: 76-1003 / 76-1003B

1. With the ignition switched off and the parking brake set, disconnect the negative battery cables on both batteries.Installation InstructionsVehicl

Page 2

15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 - www.sbﬁlters.comInstallation Instructions (continued)17. Positio

Page 3

15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 - www.sbﬁlters.comInstallation Instructions (continued)3P/N: 76-10

Commentaires sur ces manuels

Pas de commentaire

Sb-filters Intake Elbow 76-1003B Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires d'air Sb-filters Intake Elbow 76-1003B. S&B Filters Intake Elbow 76-1003B User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires d'air Sb-filters Intake Elbow 76-1003B