Sb-filters Cold Air Intake Kit - Cotton Filter 75-3017-2 Manuel d'utilisateur télécharger pdf

1/16/2008

HIGH PERFORMANCE

COOL AIR INTAKE KIT

INSTALLATION INSTRUCTIONS

75-3017-2

CHEVROLET/GMC

S10 Pickup; Blazer

S15 Sonoma; Jimmy

V6 4.3L

KIT WILL NOT FIT VEHICLES WITH BODY LIFT

QTY PARTS LIST QTY PARTS LIST

1 4” - 1.25” Adapter 1 1/8” Ring Gasket

1 3” - 3.25” x 3” Adapter 1 1/2” Grommet

1 Intake Box 1 Saddle Clamp

1 CARB Sticker 3 1/4” Washers

1 Instruction Sheet 1 M6 Nylock Nut

1 #52 Hose Clamp 1 M6 SS Washer

2 #60 Hose Clamps 1 M6 x 1.24” Coupling Nuts

2 #64 Hose Clamps 1 Twisted Bracket

3 M6 x 16mm Screws 1 Air Filter

3 M6 Coupling Nuts

1 Intake Tube 1 1/4” Finishing Washer

TOOLS NEEDED

10mm Open End Wrench Phillips head screw driver

10mm Socket & Ratchet Flat Head Screw Driver

4mm Allen Wrench 5/16” Nut Driver

5 mm Allen Wrench

1. Turn off the vehicle’s engine and dis-

connect the negative battery terminal.

2. Disconnect the mass air sensor and the

air temperature senor electrical connections

as shown in the following two photos.

3. Disconnect the crankcase vent line from

the intake plenum.

4. Remove the wing nut that holding the

intake plenum.

5. Loosen the four screws that hold the air box

top to the air box base.

6. Remove the upper air cleaner assembly unit.

7. Remove the nut that holds the air box base

and retain for later step.

9. Pull the release tab and slide the retainer

bracket up to disconnect it from the radiator

core support.

8. Pull the air box up firmly to release the grom-

mets from the retainer bracket.

10. Remove retainer bracket from radiator sup-

port.

11. Use a 7/32” socket to remove the factory

stand off from the throttle body.

12. Use a 5/16” wrench to remove the factory bolt

from the stand off then reinstall the bolt in its proper

location.

1 2 3

INSTALLATION INSTRUCTIONS 1
1/16/2008 2

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

1/16/2008 HIGH PERFORMANCEHIGH PERFORMANCE COOL AIR INTAKE KITCOOL AIR INTAKE KIT INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS 75-3017-2 CHE

Page 2 - 1/16/2008

1/16/2008 13. Remove the nut that holds the throttle cable bracket. 14 Install the short coupling nut to the throttle body stud. 15.

Page 3

1/16/2008 30. Reconnect the air temperature sensor plug. 31. Reconnect the breather tube to S&B air in-take tube. Photo depicting S&

Commentaires sur ces manuels

Pas de commentaire

Sb-filters Cold Air Intake Kit - Cotton Filter 75-3017-2 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires d'air Sb-filters Cold Air Intake Kit - Cotton Filter 75-3017-2. S&amp;B Filters Cold Air Intake Kit - Cotton Filter 75-3017-2 User Manual [it] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires d'air Sb-filters Cold Air Intake Kit - Cotton Filter 75-3017-2

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires d'air Sb-filters Cold Air Intake Kit - Cotton Filter 75-3017-2. S&B Filters Cold Air Intake Kit - Cotton Filter 75-3017-2 User Manual [it] Manuel d'utilisatio